TQJ Series
△ Economical CNC control system
△ Traction speed adopting frequency control for models with processing wire diameter below 6mm
△ Traction and straightening speed all controlled by multi-speed motors
△ Cutting length controlled by sensor switch
△ Suitable to be used in construction site
| Model | TQJ1.8-5 | TQJ2-6 |
| Wire diameter | Φ1.8-Φ5 [mm] | Φ2-Φ6 [mm] |
| Cutting length | 50-6000 [mm]（Clutch principle） | 50-6000 [mm]（Clutch principle） |
| Accuracy of length | ±1 [mm] | ±1 [mm] |
| Straitening shaft speed | 0-6000 [rows/min.] | 0-6000 [rows/min.] |
| Straitening speed | 0-110 [m/min.] (AC frequency control) | 0-110 [m/min.] (AC frequency control) |
| Cutting speed | 600 [times/min.] | 600 [times/min.] |
| Power supply | 380V 50Hz 5.2KVA | 380V 50Hz 7.7KVA |
| Total power consumption | 5.2 [kw/h] | 7.7 [kw/h] |
| Electric power consumption | 3-5 [kw/h] | 3-7 [kw/h] |
| Material | Low、middle & high carbon steel wire、Galvanized steel wire、SS wire、Alloy steel wire |
| Steel wire tensile strength | 350-1200 [N/mm²] |
| Steel wire surface | Plain smooth、Galvanized、ribbed wire etc. |
| Model | TQJ3-8 | TQJ5-12 |
| Wire diameter | Φ3-Φ8 [mm] | Φ5-Φ12 [mm]m |
| Cutting length | 50-6000 [mm]（Sensor switch, servo cutting） | 50-12000 [mm]（Sensor switch, servo cutting） |
| Accuracy of length | ±1 [mm] | ±1 [mm] |
| Straitening shaft speed | 0-6000 [rows/min.]（two steps speed） | 0-6000 [rows/min.]（two steps speed） |
| Straitening speed | 0-125 [m/min.]（three steps speed） | 0-125 [m/min.]（three steps speed） |
| Cutting speed | 600 [times/min.] | 600 [times/min.] |
| Power supply | 380V 50Hz 20KVA | 380V 50Hz 35KVA |
| Total power consumption | 20 [kw/h] | 35 [kw/h] |
| Electric power consumption | 8-20 [kw/h] | 10-35 [kw/h] |
| Material | Low、middle & high carbon steel wire、Galvanized steel wire、SS wire、Alloy steel wire |
| Steel wire tensile strength | 350-1200 [N/mm²] |
| Steel wire surface | Plain smooth、Galvanized、ribbed wire etc. |
