You are here: Home » Products » Rebar Processing Lines » Steel Bar Shearing & Sorting Lines » Steel Bar Shearing & Sorting Lines
Share to:

Steel Bar Shearing & Sorting Lines

Quantity:
Product Introduction
 
Steel Bar Shearing & Sorting Line is used to shear different sizes of bars into needed length, also with auto sorting and collection then auto transmission. Suitable for medium and large-scale rebar processing center and factories.
 
 
Product Advantage
 
λ cut-to-length for different sizes of steel bars with different length 
λ Cutting length adjusted automatically upon the servo control mechanism to ensure the cutting effort less than 5mm
λ Bi-direction discharge frames, including 4 collection frames and 8 collection position; With pneumatic sub-feeder, finished steel bars with different sizes and length can be stored in different collection frame or collection position to easy packing
λ Can be connected with Steel Bar Bending Machine, realize rebar shearing, sorting, bending together to be a complete rebar processing line
 
Technical Parameter

型号 RS1500
Rated cutting capacity 1,500 [Kn]
Conveying speed 90 [m/min]
Cutting speed 10 [times/min]
Cutting tolerance ± 5 [mm]
Cutting length 800 – 12,000 [mm]
Blade availability width 600 [mm]
Collecting pocket no° 4
Load capacity of ladder feeder 2,000 [kg] per level
Conveyor load capacity 800 [kg]
Air operational pressure ≥ 0.6 [Mpa]
Power supply voltage 380 [V] – 50[Hz]
Installed power 42[KW]
Bars diameter 10 12 16 20 22 25 28 32 35 40 45 50
Cutting bars no° (σb=490Mpa) 60 50 37 29 27 23 20 17 16 10 7 3
Cutting bars no° (σb=570Mpa) 55 45 34 27 23 21 18 15 14 6 3 2
Cutting bars no° (σb=630Mpa) 50 40 30 22 19 15 10 5 4 3 2 1
 


PRODUCTS

QUICK LINKS

©2016 CONET Science Technology Co., Ltd all rights reserved.