You are here: Home » Products » HLV series V strengthens the railing network welding production line
Share to:

HLV series V strengthens the railing network welding production line

Quantity:
  HLV series V strengthens the railing network welding production line
 
  Product synopsis
 
 The HLV series welding machine of mesh is one section is specially V the completely automatic device which strengthens the railing network to design. Use completely after the silk and the latitude silk straighten the cut-off in advance the steel wire high-quality goods. Places automatedly after the silk, most length 4 meters; The latitude silk falls the material automatedly; The welding uses the air operated compaction; The transverse steel wire spacing numerical control check, may on net present the different mesh spacing in identical; After the welding finished, the computer automated booklet strengthens V shape trough; After the knee bend, automated stack.
 
  Technical parameter
 
                                                                                                                                                                                           
 Model  HLV2000  HLV2500  HLV3000
 Steel wire diameter  φ3-φ6 [mm]  φ3-φ6 [mm]  φ3-φ6 [mm]
 The most clathria is wide  2000 [mm]  2500 [mm]  3000 [mm]
 The network is long  50-4000 [mm]Numerical control setup  50-4000 [mm]Numerical control setup  50-4000 [mm]Numerical control setup
 After silk spacing  50-200 [mm]Stepless adjustable  50-200 [mm]Stepless adjustable  50-200 [mm]Stepless adjustable
 Latitude silk spacing  50-200 [mm]Stepless adjustable  50-200 [mm]Stepless adjustable  50-200 [mm]Stepless adjustable
 Welding speed  0-80[Platoon/Minute](ACFrequency conversion velocity modulation)  0-80[Platoon/Minute](ACFrequency conversion velocity modulation)  0-80[Platoon/Minute](ACFrequency conversion velocity modulation)
 Power source requirement  380V 50Hz 1000KVA  380V 50Hz 1300KVA  380V 50Hz 1500KVA
 Aggregate capacity (power)  1000 [KVA]  1300 [KVA]  1500 [KVA]
 Power consumption  2-30 [kw/h]  2-35 [kw/h]  2-40 [kw/h]
 Compressed air requirement  0.6MPa 1m3/min.  0.6MPa 3m3/min.  0.6MPa 4m3/min.
 Cooling water requirement  0.3MPa 1m3/min.  0.3MPa 1m3/min.  0.3MPa 1m3/min.
 Wire material  Iron wire  Iron wire  Iron wire
 Steel wire tensile strength  350-550 [N/mm⊃2;]  350-550 [N/mm⊃2;]  350-550 [N/mm⊃2;]
 Steel wire surface condition  Refacing and galvanization or belt rib wire rod  Refacing and galvanization or belt rib wire rod  Refacing and galvanization or belt rib wire rod
 
 V strengthens the railing network welding production line
 
  V strengthens the railing network welding production line
 
 V network end product
 
  V network end product
 
  V network end product picture
 
 
 
 

PRODUCTS

QUICK LINKS

CONTACT US
©2016 CONET Science Technology Co., Ltd all rights reserved.